For production R & D enterprises, we can get professional answers and guidance on how their products should meet the regulatory requirements of the target market, how they should meet the standard requirements, and how they should be tested. In addition to regularly holding relevant symposiums and seminars, our company can also provide one-to-one consulting and answering services according to the requirements of enterprises.

Pursuant to the Standardisation Law of the People's Republic of China, ‘where no national or industry standards exist for products manufactured by an enterprise, the enterprise shall formulate its own standards as the basis for organising production.’ Furthermore, ‘where national or industry standards are already in place, the state encourages enterprises to establish enterprise standards that are more stringent than national or industry standards for internal use.’ Currently, a significant volume of China's export products are manufactured in direct compliance with international standards or to standards exceeding domestic requirements, yet these have not been formally adopted as enterprise standards. Our company offers consultancy services to assist enterprises in formulating and revising enterprise standards, enabling them to establish compliant standards for their products and complete standard registration. This safeguards against substantial losses arising from market exposure of products manufactured without established standards.

What does ISO22000 certification mean?ISO22000:2005 food safety management system. With the development of economic globalization and the improvement of social civilization, people pay more and more attention to food safety; Organizations that produce, operate and supply food are required to prove their ability to control food safety hazards and factors affecting food safety. The expectation of customers and social responsibility make food production, operation and supply organizations gradually realize that there should be standards to guide the operation, guarantee and evaluate food safety management. This call for standards promotes the production of standards required by ISO22000:2005 food safety management system.Benefits of applying for food safety management system certification:1. Can carry out organized and targeted communication with trading partners. 2. Optimize resource utilization within the organization and in the food chain. 3. Improve document resource management.  4. Strengthen planning and reduce post process inspection.  5. More effective dynamic food safety risk control of food.  6. All control measures will be subject to risk analysis.7. Systematically manage the necessary schemes.  8. Due to the focus on the final results, the standard has a wide range of applications. 9. It can be used as an effective basis for decision-making.  10. Continuously and stably provide end products meeting food safety requirements to meet customer requirements. 11. More effective dynamic safety risk control of food. 12. Save resources by reducing redundant system audit. How much does ISO22000 certification costFor those who want to apply for ISO22000 certification, the first thing to understand is the conditions to be met and the relevant application fees. At present, the total cost of ISO22000 consultation and certification is between 12000-16000 in the first year, and the annual supervision and audit cost is about 6000-8000 in the future, depending on the actual number of production lines and product complexity of the enterprise.The above is LANYA Xiaobian orange, sharing with you the relevant knowledge about what CE certification is and what standard it is. I believe you have a basic understanding of this. If you have any questions about professional aspects, you can contact the professionals below to answer them for you. I hope it will be helpful to you...

Recently, many customers came to consult and ask such questions. It seems that we don't know much about the handling steps and charging standards of EU ROHS testing and certification. It doesn't matter. Today, Xiaobian will summarize the six steps and charging standards of EU ROHS testing and certification.What is RoHS testerThe EU ROHS environmental protection certification is mainly aimed at the detection of whether the product material is environmentally friendly, and whether the content of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers in the material exceeds the standard. The RoHS detection products can be tested for any object liquid except air. RoHS is a mandatory certification of the EU, Therefore, it is necessary to do this test when exporting products to EU countries. The ROHS test method now mainly includes single group raw material test, complete machine test and integrated certification of finished products. The three test contents and costs are different. The applicant can choose the test method according to the requirements of his customers or the recommendation of the certification authorityThe analytical principle of RoHS detector is the same as that of X-ray fluorescence spectrometer. RoHS detector can be regarded as X-ray fluorescence spectrometer. It can be used to determine various forms of random composition of up to 83 elements in the periodic table. Its main components are X-ray tube, crystal, secondary collimator and detector, and auxiliary devices such as primary filter. For the management and control of, the customer asked the supplier to equip complete sets of equipment in full accordance with the corresponding standard testing methods. It is unlikely to establish a laboratory, but a XRF equipment tester factory can still bear it. Therefore, most of them regard whether there is XRF equipment tester as a hard condition.Must the ROHS test of products be conducted once a year?The ROHS testing standards may be updated once. In the process of continuously improving the ROHS testing standards, the new standards will expire for a long time, so there is no time limit. The redoing cycle should be updated according to the EU standards!RoHS2. 0 test items changed from 2011 / 65 / EC Directive to rohs10Lead (PB), cadmium (CD), mercury (Hg), hexavalent chromium (Cr6 +), polybrom...

What is WEEE registration?Many people habitually call it WEEE certification, which is actually wrong. WEEE: Waste Electrical and electronic equipment (WEEE), that is, the recycling instruction of broken electronic and electrical equipment. While recycling valuable resources, in order to properly deal with such large-scale electronic and electrical waste, the EU implemented two directives that have a significant impact on electronic and electrical equipment goods in 2002, namely WEEE (EU recycling directive) and RoHS (EU environmental directive).In 2016, the relevant environmental protection departments in Germany issued laws and regulations specifically for e-commerce, which stipulated that Amazon informed overseas e-commerce registered electronic equipment sold on its platform to be recycled, and Amazon must order merchants to suspend sales before obtaining the WEEE electronic equipment recycling code. Therefore, many people always believe that WEEE registration is the relevant provisions of Germany. In fact, all European and American countries have the relevant provisions, but Germany is a rigid provision.WEEE registration, testing and certification authorityIntroduction to WEEE registration:At present, Amazon implements a new policy of mandatory closure for companies selling cross-border e-commerce. If they do not register the WEEE registration code, they will force the goods off the shelves. Among all European and American countries, Germany has the strictest regulations on environmental protection, so Germany WEEE must do it!1. What are the WEEE certified products?Taking the German station as an example, WEEE registration is mainly for one type of goods. According to official data, WEEE Directive applies to 10 categories of electronic and electrical goods: large household appliances; Of small household appliances; It and communication equipment; Consumer electronic and electrical equipment; lighting; Electronic and electrical tools (except large fixed industrial tools); Toys, leisure and sports facilities; Medical instruments; Detection and control instruments; vending machine.2. Which countries are required for WEEE certification?Germany, Britain, France, Italy, Spain, Sweden, Netherlands, Denmark, Portugal, Poland, Belgium, Finland, Luxembourg, Austria, Ireland, etc. At present, Amazon implements a new policy of mandatory closure for companies selling...

Main inspection items of degraded products:Degradation performance, degradation rate, degradation capacity, degradation capacity, composting performance, degradation rate, degradation rate, degradation rate;Biodegradability LaboratoryReference standards for testing degradable materials:GB / t20197 definition, classification, marking and degradability requirements of degradable plasticsGB/T19277. 1 (iso14855-1) the final aerobic biodegradation and disintegration capacity of materials under the controlled composting standard adopts the method of measuring the released carbon dioxide Part I General methodGB/T18006. 2 degradation test of disposable degradable food and beverage utensilsDegradable polyethylene plastics for packagingGB / t19275-2003 potential biodegradation test of materials under the action of specific microorganismsEN13432 packaging. The recyclability of packaging was evaluated by synthesis and biodegradationTest method for aerobic biodegradation of plastic materials under ASTM d5338 composting standardGB / t22047 determination of final aerobic biodegradability of plastic materials in soil - the method of determining the demand in a closed absorption meter or the released carbon dioxide is usedAstmd5510 modified MITI test (rapid biodegradability) oecd301c operation standard for thermal aging degradable plasticsASTM d5511 method for determining the anaerobic biodegradability of plastic products under the standard of high solid anaerobic digestionASTM d6954 test requirements for oxidation and biodegradation of plastic products under environmental standardsGB/T18006. 1 General technical requirements for plastic products disposable tableware.HJ / T202 technical requirements for environmental labeling products disposable tablewareDegradable plastic film for QB / t2461 packaging materials:QB / t2670 definition, classification, marking and degradation performance requirements of degradable plastic sheet.QB / t2671 definition, marking and biodegradable performance requirements of biodegradable plastic products sheet.QB / t2672 definition, marking and compostable performance requirements of compostable plastic products sheetGB / t15818-2006 (jisk3363-1990) test method for biodegradation of surfactantsGB / t21803-2008 chemicals rapid biodegradability doc reduction testGB / t20778-2006 evaluation method for biodegradability of water treatment agents CO2 gen...

How to apply for the quality inspection report of conversion power cord plug? Who is the applicant for the quality inspection report of conversion power cord plug? The application for quality inspection report is handled by a third-party inspection institution with inspection laboratory and inspection qualification certificate in China.Poor quality of socket, plug and converter is a key cause of fire. The product quality problems of small sockets, plugs and converters will have a serious impact on the safety of many customers and funds. Therefore, customers should mainly consider the safety factor of goods when purchasing socket plugs, converters and switches. Plug converter is to convert some power cord plugs into another power cord plug (such as telephone power cord plug, USB charging power cord plug, computer power cord plug, which is the function of mutual exchange of power cord plugs in various countries). Because it is widely used and is very easy to cause safety problems, it is necessary to apply for the inspection report on the safety factor before leaving the factory.Quality inspection reportProcedures for inspection report of plug converter:1. Consult customer service to confirm the role of inspection items and reports, as well as cost and cycle time.2. Fill in the inspection application form and the relevant staff can provide PDF.3. Arrange samples (2-3 samples for testing), send samples that must be inspected by express delivery, arrange inspection, and arrange personnel from the testing department and reporting Department of the testing laboratory to carry out inspection.4. For report confirmation, first show the draft report for confirmation. After the information is correct, inform the customer service of the report and send the report. The paper report is sent to the customer by express, and the PDF report is sent by e-mail, mobile QQ and other online communication methods.5. The application cycle of quality inspection report is 5-7 days, and you can apply for expediting (50% expediting fee will be charged)Standard Specification for applying for inspection report of plug converter:Gb/T2099. 1. Iec60884-1 sockets and plugs for household and similar purposes - Part 1: General requirementsGb/T2099. 3. Iec60884-2-5 socket plugs for household and similar purposes - Part 2-5: Particular requirements for convertersThe standard specifies the technica...

The CE system of LVD is similar to the command of EMC console. The goods in all application fields must have CE mark and the certificate of conformity signed by the manufacturer's representative or importer. Only declare that the goods are safe ("safety" is defined as not causing death or property damage to people or livestock). For this reason, LVD's statement needs to be proved by technical documents and archives.CE test authority certification:The CE certified bottom voltage LVD console command is applicable to all motor commodities using 50 ~ 1000V AC 50 ~ 1000V DC 75 ~ 1500V DC power supply. This definition relates to the application field of console command rather than the application field of console command (for example, when using AC 230V computer, the risk caused by LVD's DC 12V power supply circuit is also determined by LVD). The CE certified LVD console command is applicable to the goods used by customers and industry. If it is a special industrial equipment, the console command also includes the goods used by the manufacturer (such as testing equipment).Relevant data of LVD console command with CE certification:1. General description of mechanical equipment;2. Design and manufacturing concept drawings;3. Master the narration and explanation required by these charts;4. List all or part of the applicable standards, and explain what countermeasures have been adopted to achieve the concept of console command security;5. Design the calculation results and check the implementation process;6. Inspection report.Detection standard of bottom pressure LVD console command:CE certification of household appliances (en60335)CE certification for lighting products (EN60598)CE certification of audio and video products (en60065)Data commodity CE certification (en60950)CE certification for electrical machinery (en60204)CE certification standard for measuring instruments (en61010)Command processing flow of production CE bottom pressure LVD console:1. Description of electrical equipment;2. Design principle, parts and circuit diagram;Narratives and instructions required to understand the above drawings and the operation of electrical equipment;4. A list of fully applicable or partially applicable standards, and a description of the failure to adopt standards that meet the security requirements of this console command;5. Calculation and inspection...

China National Accreditation Service for conformity assessment (CNAs) and Bluetooth Technology Alliance (SIG) officially signed the Bluetooth Technology Review cooperation agreement, becoming the third accreditation body in the world to sign the agreement.This provides great convenience for Chinese laboratories to apply for becoming sig authorized laboratories. In the future, as long as our laboratories pass the CNAs Bluetooth Technology Review and obtain the CNAs laboratory accreditation, they can meet the requirements of applying for sig Bluetooth Laboratory Qualification Authorization.Bluetooth is a very popular wireless communication technology. Bluetooth technology alliance was founded in 1998 by Ericsson in conjunction with IBM, Intel, Nokia and Toshiba. It is responsible for the development of Bluetooth standards and authorizes manufacturers to use Bluetooth technology and trademarks.Manufacturers must first become sig members before using Bluetooth technology.The products designed and produced by members shall pass the test of SIG authorized laboratory before they can be sold in the market with the "Bluetooth" trademark. By the end of 2018, the number of SIG members had reached 35000.Due to the large number of Bluetooth product manufacturers, SIG stipulates strict product testing and certification procedures in order to ensure the interconnection between Bluetooth products of various manufacturers. The Qualification Authorization of testing laboratory has become an important link.SIG initially authorized the laboratory through self-organization and review.In March 2018, SIG issued a new laboratory authorization procedure, requiring authorized laboratories to pass ISO / IEC17025 accreditation. Accreditation institutions should sign a multilateral mutual recognition agreement on laboratory accreditation at the International Laboratory Accreditation Cooperation Organization (ILAC) and a cooperation agreement with sig.As of June 2019, SIG has 51 global authorized laboratories. The Chinese mainland has been authorized by 22 laboratories since 2007 (it is reported that Shenzhen accounts for half), and is the largest authorized economy. At the same time, there are a large number of laboratories that intend to apply.After the release of the new laboratory authorization procedure in March 2018, Chinese laboratories were once forced to seek accredita...

Introduction to WiFi alliance certificationWi Fi Alliance (full name: International Wi Fi alliance), English: Wi Fi Alliance (WFA), is a business alliance with Wi Fi trademark. It is responsible for Wi Fi certification and trademark licensing, headquartered in Austin, Texas.Founded in 1999, the main purpose is to promote the compatibility certification of Wi Fi products worldwide and develop IEEE802 11 standard WLAN technology. The alliance has more than 200 member units, 42% of which are from the Asia Pacific region and 5 members in China.In 1999, in order to promote the formulation of IEEE 802.11b specification, the wireless Ethernet Compatibility Alliance (WECA) was formed.In October 2002, it was renamed Wi Fi alliance.In 2013, the Wi Fi alliance recently announced that it would merge with the wireless Gigabit Alliance (wigig), so as to integrate the latter's technology. The merger is expected to be completed in mid-2013, when planning and due diligence have been completed.Introduction to WiFi alliance certificationWi Fi refers to "wireless compatibility certification" in the category of wireless LAN, which is not only a commercial certification, but also a wireless networking technology. In the past, computers and wireless routers were connected through network cables, so WiFi connection can be used for networking in the effective range of radio wave coverage of this wireless router, If the wireless router is connected to an ADSL line or other Internet line, it is also called "hot spot".A growing non-profit international organization composed of more than 300 member companies, with 10 independent testing laboratories in 6 countries.As an industry and technology leader in WLAN field, it provides test certification for the world.Maintain a good cooperative relationship with the whole industrial chain, and its members cover manufacturers, standardization institutions, regulatory units, service providers and operators.Wi Fi certified certification realizes WLAN technology interoperability and provides excellent user experience; More than 3000 products have passed the certification.In 1999, several members of the Wi Fi industry joined hands to create a global non-profit organization to promote the adoption of a worldwide standard for high-speed WLAN. The organization name is the Wi Fi alliance.Because the continuous expansion of Wi Fi ...

LANYA is a professional IMEI number application organization. Now we briefly introduce the composition, meaning, charging standard, data required for application and application process of IMEI number.1、 Introduction to IMEIIMEI (International Mobile Equipment Identity) is the abbreviation of international mobile equipment identification code. Mobile phone numbers mobile phone mobile phone serial number mobile phone serial number is commonly used in GSM mobile network to identify each independent mobile phone, equivalent to the phone ID card number. IMEI code is applicable to GSM and WCDMA mobile phones and mobile data terminals, while CDMA mobile phones use meid code, which is different from IMEI code. Each GSM mobile phone sold through formal channels in the world has a unique IMEI code.IMEI codes are uniformly planned by GSMA Association and authorized to be distributed by regional organizations. In China, IMEI codes are distributed by the telecommunications terminal Testing Technology Association (TAF) of the Ministry of industry and information technology. Other distribution institutions include British BABT, American CTIA, Indian msai (mobile communication standards alliance of India), etc.2、 IMEI chargesSince 2008, as the mobile terminal model assignment code (TAC) audit organization of the Global Association for mobile communication systems (GSMA) in China, the telecommunications terminal Testing Technology Association (TAF) has insisted on Issuing TAC free of charge to enterprises in China. During this period, the international TAC allocation has been approved and issued by GSMA for compensation. In recent years, GSMA has constantly called for the issuance of TAC to follow the global unified standards and the principle of equal competition in the industry. Finally, the following charging scheme has been formed and officially implemented since January 1, 2016. 1. TAC price: $400 / piece; 2. If the number of TACs purchased in the year exceeds 30, you can choose to pay US $12000 in one time in the next year to obtain the same number of TACs as in the previous year. $3000 for every 10 exceeding parts; 3. Maximum cost of purchasing TAC: US $30000 / year; 4. GSMA members and associate members enjoy a 10% discount on the above basis.3、 IMEI number compositionIMEI (International Mobile Equipment Identity) is the abbreviation of international mobile equipmen...

The process of handling 3C certification is: application submitted by the enterprise - data review - sample test - factory inspection - Conformity Assessment - issuance of certificate. For factories that are not familiar with the process, we still suggest that the application be entrusted by Yibo, a third-party testing and certification organization. The third-party entrusting organization is familiar with the CQC audit process, has a high degree of cooperation and convenient communication channels, and can guide the standardization of factory inspection and ensure the smooth passing of factory inspection.In the specific implementation of 3C certification application, the hardware part, including production site, equipment and instruments, personnel and organization, shall meet the specified requirements; It is also necessary to ensure that the software parts, including quality assurance system, procedure documents, control procedures, inspection procedures, management systems, operating procedures, etc., comply with the specifications.3C certification factory inspection ensures that the capability meets the certification effectiveness:(1) Basis for factory inspection: factory capacity inspection requirements, national standards for certified products, type test reports of certified products, and Certification Implementation Rules;(2) Several conclusions of factory inspection: the factory passed the inspection, the factory had documented nonconformities, the factory had serious nonconformities, which needed on-site verification, the factory had serious nonconformities, and the factory failed the inspection;(3) For enterprises applying for certification for the first time, the certification agency will send a factory inspection notice to the certification applicant after receiving the report on the qualified product test results submitted by the testing agency, and issue a factory inspection task letter to the factory inspection team of the certification agency;(4) The inspectors shall carry out on-site inspection on the enterprise applying for the certificate according to the requirements of product certification factory quality assurance capacity, and take certain samples to check the consistency of the test results;(5) After the factory inspection is qualified, the inspection team shall issue the factory inspection report according to the specified report ...

ISO17025 standard is a laboratory management standard formulated by the international organization for Standardization ISO / Casco (International Organization for Standardization / conformity assessment committee). The predecessor of this standard is ISO / IEC Guide 25:1990 requirements for the ability of calibration and testing laboratories. The international organization that manages laboratory accreditation is the International Laboratory Accreditation Cooperation Organization (ILAC), which is attended by 44 laboratory accreditation institutions, including China National Accreditation Commission for laboratories (CNACL).ISO17025 standard mainly includes: definition, organization and management, quality system, audit and review, personnel, facilities and environment, equipment and reference materials, quantity traceability and calibration, calibration and testing methods, sample management, records, certificates and reports, subcontracting of calibration or testing, external assistance and supply, complaints, etc. The core contents of the standard are equipment and reference materials, quantity traceability and calibration, calibration and testing methods, and sample management. These contents focus on evaluating whether the laboratory calibration or testing ability meets the expected requirements.China National Laboratory Accreditation Commission (CNAs) is the only laboratory accreditation institution in China, which undertakes the ISO17025 standard accreditation of all laboratories in China. All calibration and testing laboratories can adopt and implement ISO17025 standard. According to international practice, the data provided by laboratories that pass ISO17025 standard have legal effect and are internationally recognized. At present, more than 1000 laboratories in China have passed the ISO17025 standard certification. Through the implementation of the standard, the accuracy of experimental data and results has been improved, the popularity of the laboratory has been expanded, and the economic and social benefits have been greatly improved.National requirementsVoluntary: the laboratory applies voluntarily according to its own development and needs.A. The need to develop tradeB. The need of quality certification developmentC. Needs of notarization activitiesD. Government management needslegal statusNon discrimination principle, laboratory of all sectors ...

With the expansion of manufacturers and the large demand for testing, there are more and more self built laboratories. LANYA can provide overall solutions, including equipment procurement and laboratory planning. Undertake packaging services.Business backgroundThe unreasonable layout of the laboratory will cause cross contamination of the laboratory, inaccurate test results, inconvenient personnel operation and other results, resulting in the risk of wasting human and material resources, failing to pass the laboratory approval, and finally dismantling and redoing.service content According to the actual situation of the customer's laboratory and in combination with the experimental projects carried out, LANYA laboratory has designed for the customer: laboratory plan, laboratory furniture layout, schematic diagram of instrument and equipment placement, laboratory decoration design, laboratory water supply and drainage design, laboratory HVAC design (exhaust, tail gas treatment, clean air conditioning) Design drawing of centralized gas supply in the laboratory, design drawing of sewage system in the laboratory, electrical design drawing of the laboratory, etc.China testing laboratory will be arranged according to local conditions according to the actual testing project requirements of the laboratory, and fully consider the convenience, safety and scalability of the laboratory work. In addition, China testing laboratory will assist customers in long-term and comprehensive planning during laboratory design, avoid future transformation of the laboratory, and try to be professional, safe, reliable, comfortable and beautiful.Shenzhen huatest Technology Service Co., Ltd. is a holding subsidiary of huatest testing and Certification Group Co., Ltd. (Stock Code: 300012). The design department of huatest laboratory has 100 engineers specializing in laboratory graphic design, BIM design, 3D design and construction design, which are designed first and then constructed, Ensure that the laboratory not only meets the requirements of relevant laws and regulations, but also meets the personalized needs of customers.contact usLANYA technology services (Shenzhen) Co., Ltd. is a national CNAs, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, wireless charging alliance WPC and Bluetooth certification companyThe evaluation committee is the a...

The testing work is meticulous and requires high professionalism. Not all manufacturers have professional engineers to control and manage. Which certifications are necessary; How to determine whether the certification requirements and standards are correct; There are too many models that need to be certified. How can planning save money and time? LANYA provides certification planning services and undertakes the overall outsourcing services of the company's certification.The test is written at will, without planning and rules, so it faces some problems as follows:Test case design is not in place, coverage is not complete, or not efficient enoughBecause of the construction period, the automation test time is compressed, and the automation test exists in name onlyThe automation infrastructure is not perfect, and the cost of writing some tests is relatively highThe lack of complete test data support leads to a great discount in the test effectIn fact, to sum up, the essence of so many problems is one reason. There is a lack of overall planning for automated testing, and automated testing is not included in the R & D system.Overall planning of automated testingIn order to solve these problems, let automated testing really give full play to its maximum value, liberate productivity, improve R & D efficiency, and let us liberate ourselves from repeated manual testing, the first thing we need to do is make an overall plan for automated testing, raise the significance of automated testing to a higher level, and let everyone realize its value and significance, including products, R & D, testing and senior management.The overall planning of automated testing should be top-down, and a complete set of system should be composed of multiple levels. This system should include four parts: framework, data, use cases and code. Each part has its own responsibilities, and the four cooperate with each other to form a complete testing system and closed loop.Here is a brief introduction to this system.Test framework of test systemThe test framework here is a general term, which can also be called test infrastructure. Its purpose is to serve test related personnel and make them write and execute tests more efficiently and conveniently, so as to improve efficiency. The following work may be involved:To build the test framework well, relevant test developers (not necess...

The requirements of various countries are changing, the technology is developing rapidly, the standards are updated, and the standards are iterative. LANYA provides training services according to the relevant contents that customers need to know. Help enterprises understand the specifications in a timely manner and ensure product compliance around the world.Technical training service refers to a kind of sales service in which an enterprise trains relevant technicians instead of users to ensure that users can effectively operate, use, repair and maintain the purchased machines and equipment products according to the requirements of users.The technical training service is applicable to providing services for users who purchase the machines and equipment products of the enterprise, which can enable users to master the operation, use and maintenance technology of the products of the enterprise, ensure that the products purchased by customers can give full play to their use efficiency, and encourage and induce users to buy the products of the enterprise; At the same time, it can also enable enterprises to establish a good reputation among users, which is conducive to creating new market opportunities and expanding the sales market of enterprise products.contentMainly including1. Train technical operators for users to ensure that users can master the operation and use methods of machinery and equipment products.2. Train the maintenance personnel of machinery and equipment products for users to ensure that users can repair themselves in case of failure during the use of machinery and equipment products.3. Train the management personnel of machinery and equipment products for users, so that users can master the management knowledge and methods of machinery and equipment products and continuously improve the use efficiency of machinery and equipment products.formEnterprises can provide users with technical training services in the following forms:1. Internal training method. Technical training courses shall be held within the enterprise, and the user shall send personnel to the enterprise to participate in training and study.2. Field practice. The user shall send technicians to the enterprise operation site for follow-up study, and the enterprise shall appoint special personnel to be responsible for coaching and guidance.3. Out training method. At the request of the ...