Lanya Testing is a professional testing and certification company in Shenzhen. The self-built automotive electronics laboratory has complete in-vehicle testing and certification capabilities, providing convenient and fast E-mark certification and CE certification (EN50498).
1. Introduction and mark of E-mark certification
1. Introduction of E-mark certification
E-Mark/e-Mark is the European common market. For automobiles and motorcycles and their safety spare parts, noise and exhaust gas, etc., product certification is carried out in accordance with the regulations of the European Union [EEC Directives] and the Regulations of the Economic Commission for Europe [ECE Regulation]. The certificate of conformity granted by the party to ensure the safety of driving and the requirements of environmental protection.
2. E-mark certification mark
Europe has safety certification requirements for motor vehicles and safety-related components and systems, which are embodied in the E-mark and e-mark certification.
One of the E-Mark/e-Mark certification marks is a round frame; the other is a rectangular frame, which represent different meanings.
The E mark originates from the Regulations promulgated by the Economic Commission of Europe (ECE). It is the European market for automobiles, locomotives and their safety spare parts, noise and exhaust gas, etc., all need to pass the product certification requirements in accordance with the provisions of the European Union Directives (EEC Directives) and the European Economic Commission (ECE Regulation), that is, to grant a certificate of conformity. In order to ensure the safety of driving and the requirements of environmental protection.
Round outer frame: refers to products that must be used when the vehicle is stopped and in motion, such as windshields, seat belts, headlights, etc.
The e-mark is a certification mark for motor vehicles, safety components and systems that the European Commission compels member states to use in accordance with EU directives. Products certified by the e-mark will be recognized by all EU member states.
Rectangular outer frame: refers to products that can be used normally but not necessarily when the vehicle is stopped and running, such as: car chargers, car lamps/torches, etc.
2. E-mark certification applicable country and number
1. E-mark certificate The certificates of various countries have corresponding numbers:
E1—Germany; E2—France; E3—Italy; E4—Netherlands; E5—Sweden; E6—Belgium; E7—Hungary; E8—Czech Republic; E9—Spain; E10—Yugoslavia; E11—United Kingdom; E12—Austria; E13— Luxembourg; E14-Switzerland; E16-Norway; E17-Finland; E18-Denmark; E19-Romania; E20-Poland; E21-Portugal; E22-Russia; E23-Greece; E25-Croatia; E26-Slovenia; E27-Slovakia; E28 - Belarus; E29 - Estonia; E31 - Bosnia and Herzegovina; E37 - Turkey; E57 - San Marino.
2. The certificates of each member state of the e-mark certificate have corresponding numbers:
e1—Germany; e2—France; e3—Italy; e4—Netherlands; e5—Sweden; e6—Belgium; e9—Spain; e11—UK; e12—Austria; e13—Luxembourg; e17—Finland; e18—Denmark; e21—Portugal; e23 - Greece; e24 - Ireland.
3. E-mark certification process and cycle
1. E-mark certification process
1) The manufacturer prepares product information documents, materials and samples;
Information includes:
A. COP protocol (not provided by the applicant and the manufacturer at the same time).
B. The manufacturer provides a system certificate to confirm whether factory inspection is required.
2) Start the test and test the project:
l Radiation disturbance (30~1000MHz);
l Transient conducted emission (fast pulse/slow pulse);
l Power line transient conduction immunity (pulse1/2a/2b/3a/3b/4);
l Radiation immunity - anechoic chamber method (400~2000MHz);
l Radiated immunity - Harness excitation method (20~400MHz).
3) Submit the test report and manufacturer's technical data for review.
4) Certificate issued by the transportation department of European countries (the issuing agency may conduct regular or irregular follow-up factory inspections on certified product manufacturers).
2. E-mark certification cycle
Usually 3-6 weeks.
3. CE certification (EN50498) certification process
1) Provide application forms, product information documents, samples, including supporting wiring harnesses
2) Test out the report
Test items:
l Radiation disturbance (30~1000MHz);
l Power line transient conduction emission (fast pulse + slow pulse);
l Power line transient conduction immunity (pulse1/2a/2b/3a/3b/4).
4. Certification cycle and number of samples
1) CE certification (EN50498) certification cycle generally takes 3-5 working days.
2) Number of samples required: 2.
contact us
Lanya Technology Service (Shenzhen) Co., Ltd. is an accredited laboratory by international institutions such as National CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Power Consortium WPC, Bluetooth Certification and Evaluation Committee SIG Amazon Amazon, etc. Lanya's mission: to make your products available all over the world!
Consulting Contact: Benson Zhang
Mobile/Mob:(+86)13632500972
Email/E-mail: sales13@cblueasia.com
Address/Add: Building C, Hongjingda Industrial Park, No. 107, Beihuan Road, Shiyan Street, Baoan District, Shenzhen
Lanya Testing is more than service!
